Información Básica.
No. de Modelo.
ERCuSi-A CuSi3
muestras
gratis
tiempo de entrega
15 días
paquete
15kg
Paquete de Transporte
15kg/Spool
Especificación
0.8mm 0.9mm 1.0mm 1.2mm 1.6mm
Marca Comercial
Xunzhuo
Origen
China
Código del HS
8311100000
Descripción de Producto
Silicon Bronze Welding Wire and rods brazing wire ERCuSi-A CuSi3
Silicon Bronze is a copper based filler metal that contains 3% Silicon and trace amounts of manganese, tin and zinc. It is used primarily for oxyacetylene welding of copper, copper-silicon and copper-zinc metals to themselves and to steel. Silicon Bronze is excellent for plain or galvanized steel sheet metal as well as other coated steels. It is also used for surfacing areas that are subjected to corrosion. The Oxyacetylene gas flame should be slightly oxidizing. Keep the weld puddle small in order to promote fast solidification and minimize cracking. A high boric acid flux should be used both before and during welding. Preheat is NOT recommended.
Silicon Bronze is a copper based filler metal that contains 3% Silicon and trace amounts of manganese, tin and zinc. It is used primarily for oxyacetylene welding of copper, copper-silicon and copper-zinc metals to themselves and to steel. Silicon Bronze is excellent for plain or galvanized steel sheet metal as well as other coated steels. It is also used for surfacing areas that are subjected to corrosion. The Oxyacetylene gas flame should be slightly oxidizing. Keep the weld puddle small in order to promote fast solidification and minimize cracking. A high boric acid flux should be used both before and during welding. Preheat is NOT recommended.
| Grade number | The name of the | Meet (comparable) standards | Main Chemical Composition (%) | Features and Uses | |
| GB | AWS | ||||
| S201 | Special copper welding wire | SCu1898 | ERCu | Sn1 Si0.3 Mn0.3 Cu Rem. | Good mechanical properties, good crack resistance. Copper gas welding and argon arc welding. |
| S211 | Silicon bronze welding wire | SCu6560 | ERCuSi-A | Si3 Mn1 Cu Rem. | Good mechanical performance, copper alloy MIG brazing with argon arc welding and steel |
| S212 | Phosphor bronze welding wire | SCu5180 | ERCuSn-A | Sn5 Cu Rem. | Good wear resistance. Copper alloy argon arc and steel surfacing |
| S213 | Phosphor bronze welding wire | SCu5210 | ERCuSn-C | Sn8 Cu Rem. | Good wear resistance. Copper alloy argon arc and steel surfacing |
| S214 | Aluminum bronze welding wire | SCu6100A | ERCuA1-A1 | A17.5 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloy and surfacing of steel |
| S215 | Aluminum iron bronze welding wire | SCu6180 | ERCuA1-A2 | A19 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloy and surfacing of steel |
| S216 | Aluminum-nickel bronze welding wire | SCu6327 | --- | --- | --- |
Note:
1.Before welding the oxide,oil and other contaminants on the welding edge of the workpiece and welding wire surface must be cleaned,therwise it will lead to porosity, slag and other defects, so that the performance of the weld is reduced.
2.The addition of tin expands the temperature range between the solid and the liquid phase.In order to reduce the thermal tendency in small pool and fast welding is appropriate.
3.T tungsten inert gas arc welding, the workpiece requires preheating,only with the flat position welding
Product pictures 
Other products are available 